Let there be light
OR
Baby it’s cold outside

I just fixed the lamp in the kitchen. When I say fixed, I mean that a month ago, changing the bulb didn’t work to restore the light that should come on when a switch is flipped. This was not surprising because the fixture had a long, slow death, taking tens of minutes to come on in the morning at the end. We had an electrician out to fix the wire that I ran over with a lawn mower this summer (oops). He also looked at the light and said the ballast was probably dead. I got a new fixture last week and tonight I wired it up. The kitchen is much brighter now. And Rob seems impressed that light comes immediately on when he flips the switch.

Rob has been enjoying heating with wood. Unlike when I was growing up, the house now has an HVAC system, so if he decided it wasn’t so fun, we could flip a switch and be warm. But the heat from the furnace isn’t as good as wood heat somehow. It’s too dry and doesn’t smell as good and makes weird noises in the middle of the night. Rob gets up early Saturday morning to go collect and chop wood. He sometimes literally can’t wait to get out of the house. He claims it is in the name of exercise, but I’m pretty sure he enjoys it.

According to him, we keep the house in the mid-60’s. He monitors the temperature in each room several times a day. I seem to like it slightly colder than he does. The upstairs is warmer than the downstairs. The living room heats up quite a bit on sunny days (due to the parents eco-friendly design), but Indiana has plenty of cloudy days as well. That’s when it helps to have wood heat.

The grass is always greener
OR
Just drop a seed

new grass

new grass where we had thought we would put an herb garden

A couple months ago I decided to plant some new grass in a couple areas around the house. I was considering buying some ecolawn, which I read about on the internet. It claimed to be a really environmentally friendly grass, in that it required very little mowing and watering. This sounded ideal to me. I ordered a 5 lb. bag for $30 (+ $15 for shipping & handling), then waited. And waited. After 12 days, I decided to contact them. I e-mailed them, and they replied promptly saying, “the credit card information you gave was not valid.” I was underwhelmed by their customer service to say the least. I gave up on them and decided to simply buy some grass seed at Pell’s, one of the local hardware stores in town. They offer a variety of different seeds in bulk, including grass seed. I got 2 pounds of “shady turf”, which was a blend with primarily fescue, which is what the ecolawn claimed to be. I also got 5 lbs of their general mixture. The shady turf was about $3 pound, and the normal blend was about $2 per pound, for a total of about $16, much less than what I would have paid for the ecolawn. I put the shady turf around the deck, where I had cleared out a bunch of brush. I ended up running out of it and switched to the general mix. I also planted some in some bare spots elsewhere in the yard, and ended up buying more seed a couple times before the end of the season.

new grass 2

close-up of new grass about one week after planting

I have planted grass elsewhere, and it seems that anywhere from 25%-50% success rate per seed is not bad, but I would have to say that I got more like 75% here. This ground is really fertile! It probably isn’t that impressive in the grand scheme of things, but it makes me happy.

grass around the deck

grass around the deck
grass around the deck 2

close-up of grass around the deck about 2 weeks after planting

Getting ready for winter

woodpile in April

woodpile in April – after a bit of cleaning up

Last weekend Dave came out to visit. We made a long list of projects, and accomplished quite a few of them. The main project that I was really hoping he could work on was installing some new ducts to the wood stove. When Clare was growing up, they heated solely with wood, and had ducts from the wood stove going to most of the rooms in the house. When they decided to move and rent the house, Dave and Ellen figured that most renters would not want to heat with wood, so they hired their good friend and neighbor Louis Fender to install a furnace and air conditioner. When Louis put in the new furnace, he disconnected some of the ducts to the wood stove, since they weren’t being used. Now that Clare and I are trying our hand at homesteading, we decided that we would like to try to heat with wood as well. Thus we asked Dave to put in some new ducts.

fallen oak

partially cut down fallen oak up past the pond

Actually, Dave wanted to do this in June when we were moving in, but I told him at the time that it wasn’t a top priority, which it didn’t seem like it was in June. I also thought it would be a pretty big project, and the house was pretty crowded in June with all of us (Clare, Rob, Dave, Ellen, Harold, and Fran) working on various projects. Needless to say I was surprised when I came home from work on the Thursday of Dave’s visit to find that he had already completed the duct project, and a few other projects as well. But, it can always go the other way too. Clare and Dave spent about 6 hours on Saturday trying to install an outside light that we could switch on and off from inside, which at first seemed like it was going to be easy, but unfortunately did not get accomplished. They still haven’t figured out exactly what is going on with some of those wires. Dave was successful in installing a new motion detector light on the side of the garage which is working very nicely now, and a new light above the stove. Both are highly appreciated.

woodpile in October

woodpile in October – after much more cleaning up

While Dave and Clare were working on the outside light project, I decided to work some more on the wood pile project. I had been cutting up a fallen oak back in the woods over the summer, but I had not carried the pieces down yet. The more I thought about doing this, the harder it seemed. My original plan was to carry the wheelbarrow over the creek, carry the wood down to one side of the creek in the wheelbarrow, pile it up, then eventually carry the wood over the creek, and put it back into the wheelbarrow. As I thought about this more, I decided I should just go ahead and build a bridge, which I did awhile ago. Now that the bridge was built, getting the wood from the forest was much easier (though still quite a bit of work). Dave took down a couple loads on Friday and split some. He then suggested throwing out some of the old rotten wood, to avoid attracting termites. That project also took longer than expected. I worked on it for most of the day Saturday. Now it is looking much better. So my plan now is to continue cutting wood in the forest and bring it down to the wood rack, stacking it in the left third, then put it into the right third as I split it, which according to Dave gets easier when the temperature falls below freezing.

A bridge reborn
OR
One down, one to go

old bridge

The washed out bridge

One project that I really wanted to get done this year was to build a new bridge over the creek. When Dave and Ellen lived here they had a culvert pipe bridge near the garage. It would get filled up with debris over time, so they would usually clean it out every spring. The renters did not clean it out, so the creek ended up washing over and around the road. It has changed its course quite a bit in the last 10 years. Ultimately, I would like to put in a new culvert pipe bridge, so that we could potentially drive up to the pond area, or at least get the riding lawn mower over there. But that project will have to wait until next year.

Rob by old bridge

Rob by the washed out bridge

By far the best renter at Twin Springs was Laurie Fender, daughter of Louis and Angie Fender, who live just down Rocky Hill Road, and are good friends of Ellen and Dave. Not only did she put up really cool craft paper on the stairway wall, but she also built a wooden bridge over the creek. When Clare and I came to visit a year or two ago it was still there, but it seems to have gotten washed away at some point. This spring Dave mentioned that he had seen it, but by the time we moved in June, everything was so overgrown by the creek that we could no longer see it.

new bridge

View of the new bridge looking out onto the field and the dam

So the first step in building a new bridge was to figure out where to build it. This step involved wading through all the weeds around the creek, and clearing some of them out. It turns out quite a few of the weeds got pushed over in one section by the flood earlier this summer, so it didn’t require much clearing. I cleared this area out sometime in June or July, and found a place where I could do a hop, skip, and a jump over the creek. This provided a temporary way to get up to the pond, and to get to the spring where I dug the ditch. Originally I planned to build the bridge over this spot, but after clearing out the other side of the creek near the ditch, I decided that that would be the best place to build the bridge. It is very likely that this was the original location of the bridge anyways, seeing as how the old bridge was washed up there.

bridge low view

perspective view of the bridge

I decided to try to salvage the old bridge if possible, and after clearing out enough weeds by the creek, I was able to determine that the wood on the old bridge was not rotten. I tried to lift out together, but it was a bit too heavy, so I took it apart first. Then I started thinking about how to rebuild it. The original construction simply had two long boards on each side, hammered together to extend them, with cross pieces about 4 feet long. I recalled walking on it earlier, and thinking it was not super sturdy, so I decided to put a supporting beam in the middle as well. I found a long 2×9 (yes, it seemed to be about 9″) above the garage, which seemed like it would do the trick.

bridge close up 1

The bridge has a mixture of random boards as the floor

I noticed that a few of the cross pieces on the old bridge were attached with nails, but mostly with screws. I decided that screws would be a better choice. They hold better, and I am also not that great at hammering. Fortunately we have a really nice cordless drill that John and Jean Wolfe got us at the wedding shower they threw for us. This allowed me to construct the bridge right by the creek, instead of having to drill the holes where I had access to an electrical outlet. The drill also has a neat feature which makes it very quick and easy to switch from a drill bit to a screw bit. This way I was able to pre-drill a couple holes on one cross piece, then screw it in. I used 2 ” drywall screws that we had leftover from the drywall project by the refrigerator.

bridge with ditch

The new bridge is right next to the ditch I dug

I managed to find about half a dozen boards about the right thickness and length above the garage, which I interspersed between the old cross pieces. I started off by laying out the cross pieces on top of the long boards approximately where I wanted them. Then I attached several cross pieces on one side to the two long boards. Once I had several cross pieces attached, then I added in the middle long beam for more support. I continued adding cross pieces one at a time, occasionally checking the distance between the long boards to make sure I was making the bridge fairly straight.

bridge close up 2

I ran out of old boards, and had to buy a few new ones to finish the bridge

Once I had the bridge constructed, it was time to move it into place. For this I required some help, and Clare was more than willing to assist me. I got down in the creek and pulled on the bridge while she pushed, then we both pulled from the other side. We tried it out, and it did not fall down, though it was a bit unstable, and I had run out of cross pieces before finishing. I decided that it was enough for one day though. Last Saturday I went into town and bought some new 1″ x 6″ boards at Hanlon brothers to use as the remaining cross pieces. I was pleased to discover that I could fit them in my little Focus hatchback, by putting the seats down, and letting them stick out the passenger window a few inches.

ruts for the bridge

I dug out some ruts for the boards to sit in, which helped stabilize the bridge

After putting on the last few cross pieces, the final step was to dig some ruts for the long boards to sit in, which would help level the bridge out, and make it a bit more secure. The ruts seemed to do the job quite well.

bridge looking back towards house

View of the bridge looking back towards the house

Now when I am mowing the lawn I can see out onto the bridge and the field on the other side of the creek. The bridge will come in handy for getting the push mower and the wheel barrow over the creek. I will need the wheel barrow to help me collect the firewood I have been cutting down from the fallen oak tree in the forest. The only downside of the whole project is that it seems that Clare and I got poison ivy from putting the bridge into place. We have been taking lots of benadryl, and just suffering through it. Maybe next spring we will try making a soup of poison ivy and morels, as the doctor at the IU health center recommended.

Fighting The Land

weed growing from house

Figure 1. Clover growing from the corner of the house

I can no longer recall whether I learned this directly from Dave or through Clare, but some time ago I learned the phrase “fighting the land”, and that much time was devoted to this endeavor at the Dibble homestead. At the time, I didn’t really understand what this was all about. In fact, I would go so far as to say that it seemed wrong to me. We should love and hug trees, not fight them. But now that I have been living here for a couple months, I have a better understanding of what this means, and much of my time has been spent fighting the land. Of course I still like nature, but now that I am living much closer to it (as opposed to just visiting nature as in camping), I want to keep a little distance between nature and civilization.

deck area

Figure 2. Area around the deck after clearing some of the brush

I think that a few feet is a good minimum distance, which is not the case everywhere around the house (see Figure 1). The area around the deck was very overgrown when we got here, and that was one of my first outdoor projects here. Unfortunately I did not remember to take any before shots of that area, but an after shot is shown in Figure 2.

burn pile

Figure 3. Burn pile

It is a fairly simple process. I take out my “cuttin’ tools”, which at first consisted of a pair of hedge shears, a pair of clippers, and a hatchet, but more recent additions include an axe and a “weed cutter”, and cut stuff away. I don’t agree with our current president on many issues, but I do agree with him that clearing brush is fun and relaxing. It is fairly easy to make visible progress quite rapidly, and it is physically tiring, which is good for people like me who spend most of their workday sitting around. So the next step in the “fighting the land” procedure involves piling up what I have cut (see Figure 3), waiting a week or two until it is dry, and then burning it (Figure 4).

Clare by fire

Figure 4. Ceremonial burning

I can’t recall why Clare was looking at this, but a month or two ago she was looking up some rules and regulations on the Indiana state website, and came across rules on open burning. Open burning seems to be pretty common here, but apparently it is highly regulated. There are certain restrictions on the time of day that things can be burned, on containers for burning things, and so on. It seems that the only truly legal way for us to burn brush is for “ceremonial purposes”. So every time we need to burn something, we have a little ceremony. Frequently this simply involves a toast with some PBR, or, like last weekend, we had some friends over and had a puffed sugary gelatin roasting ceremony.

ditch

Figure 5. Spring to Creek ditch

My latest project for fighting the land has been to dig a ditch. The area on the other side of the creek, which used to be a road, but is no longer very road like, is very wet all year round, because of the spring in the hillside. The spring flows all the time, and generally fills up the road with water. Dave suggested digging a ditch from the spring down to the creek, to force the water to go where I want it to, i.e. to fight the land. This seemed like a good idea, and when I mentioned this to William Harriman, who actually drives on that road with his tractor to mow the back field, he mentioned that he already dug one, but that it had gotten messed up from driving over it with the tractor. On Monday I finally got around to digging a new ditch. I was able to find some of William’s ditch and use that, which was quite helpful. I will still probably need to dig out the ditch a bit more, but the ditch (Figure 5) seems to be functioning fairly well so far. The next step will be to rebuild a bridge (or two) over the creek.

heavy weather
OR
phoenix tomatoes

heavy weather

the garden and field after a very intense rain. Notice where there has been flash flooding.

We planted some tomatoes shortly after we got down here, on June 18th or so. Said tomato plants were courtesy of or friends and neighbors the Harrimans. William’s Greenhouse has a nice variety of quality plants for anyone near Spencer.

When we planted them, the ground was pretty dry. Apparently the annual rainfall was about 3 inches above average around mid-May, but 3 inches below normal by mid June. The tomatoes did quite well in their first couple weeks.

Then it started raining around June 26th. At first, the parched plants seemed quite happy with all the rain. However, it rained pretty steadily off and on for several days. The stream filled up and overran its banks, including the area containing the tomatoes.

img_3867.JPG

We had planted the tomatoes though holes in black plastic to minimize weeds and help them retain moisture in case the drought had continued. The first time that part of the yard flooded, the black plastic stayed under the flowing water. The water receded some. Unfortunately for us and the tomatoes, it rained again the next day. The second time the low area flooded, the more violent flow carried the black plastic and the bricks holding it down several yards from the garden.

Since the black plastic had holes in it to let the plants through, I assumed that the tomatoes had been snapped off at their base for the plastic to move. We were sad at the loss of our tomatoes. This flooding was strong enough to carry logs a foot in diameter and 6 or 8 feet long into the middle of the field, so expecting plants to survive is optimistic even without the plastic moving.

healthy tomato plant

A tomato plant about 10 days after the flood.

However, once it dried out a bit, we took a walk to survey the damage. It was not as bad as we thought. In fact, it seems that all of our plants have pulled through the big rain. Out of the sludge and mud, the tomatoes have risen again for a second chance.

The plants were pretty caked in mud, so Rob “washed them off” by spritzing them with a spray bottle. I knocked some of the mud off by hand, and we staked them up. The only real problem that remains from this diversion is that thinking they were dead for a week was long enough for stores to sell out of tomato cages for this season.

Hoosier Hospitality

img_3911.JPG

Thanks to the Fenders for this basket of goodies from their garden! Our neighbor Angie brought this over on July 8th with an explanation of exactly which garden and who picked what that is a bit too jumbled in my head to publish. It is nice to have neighbors that check up on you, especially when it includes fresh produce.

The hands of time OR updating art

A long time ago (in the 1970’s?), my father was not yet a father and with all this free time, he tried his hand at stained glass. One of the things he made was a clock that hung in my mom’s mom’s kitchen for as long as I can remember. When she broke up her house a year or two ago, she gave me the clock. Apparently, back in ancient times, they did not have “batteries”. The clock was hard wired to be plugged into an electrical outlet to run. And Grandma Wolfe’s kitchen had an electrical outlet where the clock went, so all was well.

Unfortunately, no one puts electrical outlets in the ceiling anymore. So I have been searching for battery operated clock hands for a while. Moving prompted me to get more serious about finding clock hands, since it reminded me that I had been in possession of the clock for 2 years without hanging it up. I am making more of an effort to take advantage of and recognize the value of things I already have.

If you want to know where to find clock hands, Hobby Lobby carries them. They have a nice note on the door about how they aren’t open on Sundays to give their employees time to worship. Alas, we only have 6 days to worship the thousands of square feet of the retail space that said doors reveal. I am finding increasingly awe inspiring as I grow older, or perhaps since I have spent time in Europe and large cities where space is too expensive to support acres of craft supplies and decor.

After agonizing over how thick the clock face might be, I selected one battery driven clock mechanism and some extra fancy hands. It was straight-forward to install and seems to still be working a week later, so I am ready to declare the project a success.

Check out my awesome clock.

img_3862.JPG

Our new neighbor
or
That’s a big spider!

spider close-up

Close-up of the big spider in the bathtub

About a week ago, we noticed a very large spider in the kitchen, right by the hole where the old tap for the cookstove used to be. Clare told me to come look at it. Indeed, it was very large. It was so still I thought it might be dead, so I tried prodding it with an extended tape measure, and it scurried off at lightning speed.

spider perspective

A little more perspective on the size of the spider

The next day, Clare informed me that the spider had taken up residence in the downstairs bathtub. I confirmed this, and continued to check on the spider a couple times a day. It seemed like it hardly moved at all in the tub. On Saturday, a few of our friends came over for dinner, and we showed them the spider as part of the house tour. They hypothesized that the spider might not be able to get out of the tub and that we should try to put it outside. This seemed like a reasonable idea. I don’t like to kill spiders, since they eat other insects like mosquitoes.

releasing the spider

Rob releases the spider outside

Sunday morning we mulled over how we should take it outside, and we decided on trying to get it to climb into the dustbin. That was actually quite easy, and the spider did not seem anxious to leave it, so I carefully walked outside with the dustbin, had Clare take a picture, then set it out by a tree. Hopefully he is doing better outside.

Dryer Installation
or
10 hours of patience pays off

back view

Figure 1. View from the back of the dryer, fully assembled

Today the washer and dryer arrived from Sears. We ordered the LG Tromm Steamwasher and LG Tromm gas dryer. After several years of living in apartments with crappy laundry machines, we were really looking forward to something better, especially to a front-loading washer, which is supposed to be much more energy efficient.

Front with control panel off

Figure 2. Front with control panel off

Much to my surprise, the delivery guys were planning on installing the appliances as well, which was very nice. However, they will only install natural gas dryers, not propane. So they installed the washer and tested it, and then I got to work installing the dryer once they left. I had known ahead of time that I would need to convert the natural gas (LNG) to propane (LPG), and Ellen had already ordered the necessary conversion kit. The kit is actually just one little part (see Figure 11 below). Swapping this part out is in theory pretty easy, but in practice was quite difficult. I thought it would be worthwhile to put my experience on the internet.

Top view with top cover removed

Figure 3. Top view with top cover removed

Now that I have done it once, I probably could do it again in less than an hour, but the first time was very tricky. The real tricky part was figuring out where this little piece should go. The part came with some instructions, including a diagram of the relevant parts, but this was by far only a tiny bit of the necessary information. First of all, the instructions said to hire “qualified technician”, but not only did I have no clue of who to hire, since we had just moved, but I also did not want to pay for it. So, I read the instructions:

  1. To avoid personal injury, disconnect power before servicing this dryer.
  2. Gas supply line shut off valve must be in off position
  3. Disassemble the dryer
  4. Replace orifice as follows:
    1. Remove 2 screws
    2. Disassemble the pipe assembly
    3. Replace natural gas orifice with propane gas orifice
  5. Close the “change screw”
Closeup of screws to remove

Figure 4. Closeup of screws to remove

Backup there a second!!! “Disassemble the dryer”??? What exactly is meant by that? Well, that was a good question. I initially started down the wrong path, trying to open the back cover of the dryer, but after an hour or so realized that was the wrong place to look. I asked Clare for some help, and she suggested taking off the bottom. We put the dryer on its side to check into this option, and discovered some access panels on either side of the dryer near the bottom. After prying off the access panels, we were able to see a bit more of the inside, and lo and behold, we saw the part shown in the diagram in the instructions — all the way at the front right bottom corner of the dryer. Now the question was to figure out how to access it.

More screws to remove to get off front cover

Figure 5. More screws to remove to get off front cover

Normally, in this situation, we would turn to the internet. The problem was, that we still have not gotten internet hooked up at home. So, we ended up going to the public library to use the internet. And that turned out to be little help as well. I spent at least half an hour searching the internet before I found any helpful advice, which was in a forum called fixya.com, and consisted of the following steps (paraphrased):

  1. Remove 2 screws on each end of control panel frame
  2. Disconnect control panel harness. Pull up and forward
  3. Remove 4 screws on top of front cover
  4. Disconnect harness for the door switch and pull forward
Front view with front cover off

Figure 6. Front view with front cover off
Front view with lint cover removed

Figure 7. Front view with lint cover removed

These instructions started to make sense to me. I wrote them down, and we headed back home, where I continued working on it. I had already taken the top panel off, by first removing the small bracket which connects the top panel to the back panel (6 screws total), and then the top cover slides back a bit, then lifts off. The next step was to remove the control panel (with the LED, buttons, knobs and all that. The first step there is to remove 2 screws from each side of the back of the panel (note that each side includes one pointy screw and one flat screw). Then, you must disconnect all the wires to the control panel. If you ever installed a hard drive in a computer or anything like this, this should not be too scary. Just make sure you don’t have excess static electricity built-up, by touching something metal. All of the connections clip in, which means you have to press in on a tab to get them out. Once you have disconnected the wires, the whole panel should come off fairly easily (there are also some plastic tabs to be careful of).

Once the control panel is off, you will see 4 screws at the top of the front panel which were hidden by the control panel. You will want to remove these. This step took me well over an hour, because one screw was in so darn tight. After removing these screws, the door latch must be removed, as well as the screws next to it and the screws holding in the lint trap. Now the front cover should come off very easily, and the part we are interested in should be visible.

Figure 8. Wires from control panel

Figure 8. Wires from control panel

The next step that I took is probably not necessary, but I found it helpful. The lint cover partially obstructs the path to the orifice housing, so I also removed it, as shown in Figure 7.

Housing for the orifice

Figure 9. Housing for the orifice
The part that holds the orifice

Figure 10. The part that holds the orifice

Now one simply has to have a short screwdriver to remove the two screws on the top side of the piece that shields the orifice (Figure 10). Once this part is removed, it should be possible to unscrew the LNG orifice (I used pliers to get it started), and put in the LPG orifice. Once this is done, it is important to switch the regulator screw from open to closed.

The two orifices

Figure 11. The two orifices. Propane is on the left. Gas is on the right. Ruler shows approximate size.

Finally, just put everything together again, and that is it. Once I had everything back together, I plugged it in (since there are electronics, it requires electricity as well as gas (or propane) and nothing happened. A moment of shock! But, I kept my cool, and decided to re-check all the wires. Sure enough, I had overlooked one. I plugged it back in, and then everything was working like a charm.

Figure 12. Regulation Screw

Figure 12. Regulation Screw
Control panel wires reconnected

Figure 13. Control panel wires reconnected. (Except for one that I missed. Can you see it?)

So, after about 10 hours (including the time to search the internet at the library, and to do the normal hooking up of the gas line and the vent), we had a working dryer, which should not cause the house to blow up.

Hopefully someone else will find this information useful.