Once I had the cabinets assembled and installed on the side of the kitchen opposite the sink, I was ready to tackle the sink side. This meant we would be without a sink for awhile, which meant we couldn’t cook very much. Per Clare’s suggestion, I tried to cook up a bunch of leftovers beforehand, but since the project took almost twice as long as I had planned, we ended up eating out quite a bit anyways.
The first step was to remove the old kitchen cabinets. I started by disconnecting all the plumbing and shutting off the water to the sink. Then I removed the sink. This involved cutting the silicone with a utility knife, and gradually prying the sink out with a pry bar and a chisel. Then I moved out the dishwasher. Then I began removing the counter top. The counter top was attached with screws from underneath, so I took out all those screws with my handy cordless drill. Once all the screws were out, I used the reciprocating saw to cut the counter top into several pieces. I had to yank the counter top off a bit, since it was also stuck to the wall a bit with some caulk.
Continue reading New kitchen cabinets, part two